|
|
The Sensor Connection EGT Digital Pyrometer Gauge and Probe Kit for Diesel Racing is a type K thermocouple with bendable probe. Designed for engine testing and racing environments, the EGT Digital Probe has an Inconel sheath for protection and can sense temperatures to to over 2300 degF.
The Sensor Connection EGT Digital Pyrometer Gauge and Probe Kit can be used is a broad variety of applications in the automotive engine testing and racing environments as well as industrial applications such as small turbines, plastic molding machines, and steel smelting operations. The Kit includes the bendable probe and meter assembly.
Kit Includes the CHT FS Series Cylinder Head Temperature Sensor and Digital Pyrometer Gauge
Kit Includes the CHT WS Series Cylinder Head Temperature Sensor and Digital Pyrometer Gauge
The LRS-18 series of LVIT (Linear Variable Inductance Transducer) spring loaded position sensors by Alliance Sensors Group are contactless devices designed for dimension or position measuring applications in factory automation and in various industrial and commercial applications such as automotive testing, mil/aero test stands, robotic arms, and packaging equipment, where the sensing element cannot be attached to the object being measured. LRS-18s are offered in full scale ranges from 12.5 to 100 mm (0.5 to 4.0 inches) with excellent resolution and high stroke-to-body-length ratios. The maximum tip force on the item being measured is 1 pound.
LRS-18 ...
The Cylinder Head Temperature Sensor (CHT Sensor) is designed for surviving high vibration and temperatures up to 1832 degrees F (1000 degrees C). The sensors will fit most 12 mm, 14 mm, or 18 mm spark plugs. The sensor cable lead length is 6 feet (1.8 meters). Install between the cylinder head and spark plug hex.
The sensor cable is over-braided in stainless steel for heavy-duty abrasion resistance. The signal wires are PTFE insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently in the most extreme operating conditions.
The high temperature sensors of choice for professional racing teams, ...
The LR-19 series LVIT (Linear Variable Inductance Transducer) position sensors by Alliance Sensors Group are contactless devices designed for factory automation and a variety of industrial and commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position, and packing equipment. With their compact device, superior performance, and excellent stroke-to-length ratio, the LR-19 sensors are ideal for both industrial testing, laboratories, and OEM applications.
LR-19 series sensors are offered in 6 full scale ranges from 25 to 200 mm (1 to 8 inches). Operating from a variety of DC ...
The Cylinder Head Temperature Sensor (CHT Sensor) is designed for surviving high vibration and temperatures up to 600 degrees F (315 degrees C). The sensors will fit most 12 mm or14 mm spark plugs. The sensor cable lead length is 6 feet (1.8 meters). Install between the cylinder head and spark plug hex.
The sensor cable is over-braided in stainless steel for heavy-duty abrasion resistance. The signal wires are PTFE insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently in the most extreme operating conditions.
The high temperature sensors of choice for professional racing teams, R&D test ...
The Surface Temperature Thermocouple with Miniature Copper Pad is designed for use in R&D and Testing of Heat Exchangers, Radiators, HVAC, PCBA's and other temperature testing applications requiring a small foot print. The sensor is made in the USA with superior materials, designed to withstand even the most rigorous testing conditions.
Typical temperature measurement applications are, but not limited to:
-
Liquid cooled radiator assemblies such as tubes, tanks and fins.
-
Heat exchanger elements
-
HVAC Condensers
-
Forced air ...
This new self-sticking stick on Type K thermocouple probe has been engineered to perform in higher temperature thermocouple applications up to 500° F. The small size and quick response time will make these a real favorite around the lab and the track.
They apply easily and give an accurate reading up to 500 Degrees F. They can be used any where you need critical temperature measurements for intake and exhaust manifolds, water jackets, transmission, engine blocks and housings.
This item includes a mini-male connector & 15 feet of cable (5 meters)
Overview
The Weld Pad Surface Temperature Thermocouple Probe is designed for use in industrial applications to measure surface temperature by way of attachment via weld, braze, or clamp. The pad is flexible to easy form to the contour of a flat or curved surface. The probe is made in the USA with superior materials, designed to withstand even the most rigorous operating conditions.
• Pad material is 304 stainless steel
• Pad dimensions are 1.0" x 1.0" x 0.01" (25mm x 25mm x 0.25mm)
• Pad can be brazed, welded, or clamped to surface
• Stem is flexible
The LZ-33 Series of LVIT (Linear Variable Inductance Transducer) position sensors are contactless devices designed for frictionless measurement in factory automation or assembly machinery applications where space is a premium, as well as for external mounting on hydraulic cylinders to sense rod position. The LVIT is offered in nominal full scale ranges from 150 to 900 mm (6 to 36 inches) with an excellent stroke-to-length ratio, so that the sensor’s overall length is only 76 mm (3 inches) longer than the linear range of the unit. The sensor has a 33.4 mm (1.315 inch) outside diameter aluminum or optional stainless steel body with a 1 or 3 m radial cable ...
The LZ-25 Series of LVIT (Linear Variable Inductance Transducer) position sensors are contactless devices designed for frictionless measurement in factory automation or assembly machinery applications where space is a premium, as well as for external mounting on hydraulic cylinders to sense rod position. The LVIT is offered in nominal full scale ranges from 50 to 900 mm (2 to 36 inches) with an excellent stroke-to-length ratio, so that the sensor’s overall length is only 38 mm (1.5 inches) longer than the linear range of the unit. The sensor has a 25.4 mm (1 inch) outside diameter aluminum or optional stainless steel body with a 1m radial cable for I/O ...
Alliance Sensors Group's SC-200 DIN-rail-mounting LVDT signal conditioner for industrial measuring systems, testing laboratories, and factory automation offers push buttons for fast and easy calibration of the Full Sale and Zero outputs, differiential input to minimize ground loop noise, and color-coded screw terminal plugs for quick hook up. The SC-200 is engineered to work with a very wide range of LVDT, RVDT, and inductive half-bridge (LVRT) sensors by providing four excitation frequencies that operate most AC-LVDTs over a 50 to 5,00 mVrms range of sensor output. SC-200 modules offer a choice of 8 analog outputs and half-duplex RS-485 digital comm port ...
Our Technical Support Staff: We have more than 150 years and three generations in the position sensor business and are expert application engineers at what we sell. We have real world experience and know how to solve your measurement challenges. Need help technical help with your measurement application? Call us today 856-727-0250.
Our Web Site: We are constantly improving our website and adding new sensors to our product offerings.
|
|
